 |  | 
 
Wireless Network 2.4 GHz Omni Directional Antenna Booster
|
Maximise the range and improve the usability of your wireless network
This antenna easily solves the common problem of poor signal coverage with
wireless networks. You may avoid buying an expensive signal repeater and spending the time to set it up all together !
|
Installation is easy.
- Simply unscrew the standard weak antenna that came with your wireless 802.11 equipment.
- Then attach the Antenna Booster's signal cable to your wireless equipment by screwing it in.
- Finally, you can bring the Antenna Booster up to a taller location as the cable length is 1 meter.
- To further fine-tune
for maximum strength placement location, the Antenna Booster has a
swival base which allows it to tilt from upright to 90 degree
horizontal. There is no need to spend any time doing
this as the signal boost result is very obvious, unless you want to test for the maximum coverage possible.
|
- 2.4 GHz Directional High Gain Antenna
- For use with IEEE 802.11b/g wireless networks
- Extends Operational Range
- Boosts Signal Strength
- Compatible with all devices with a TNC or reverse SMA connection :
- Wireless Access Points
- Routers
- PCI Host Cards
- Quick and Easy Installation (no software required)
|
It amplifies the
signal in a strong concentrated direction.
This is an essential piece of equipment for anyone trying to set up a reliable7
wireless network or trying to increase the range of an existing
network.
Product Specifications:
|
|
| Frequency 2.4 ~ 2.4835 GHz |
| Impedance 50 Ohms nominal |
| SWR ≤ 2.0 |
| Gain 4 dBi |
| Radiation Omni
|
| Connector Reverse SMA |
| Height 167mm |
| Cable Length 1.0m |
|
System Requirements- 802.11b or 802.11g 2.4GHz wireless network
- Wireless device with TNC or reverse-SMA connector (wireless
router, wireless access point, wireless network adaptor or wireless
bridge)
|
|
Condition: Open Box - limit 1 per customer -
|
|
